nc73
bio-buddies member
Posts: 84
|
Post by nc73 on Feb 12, 2006 9:36:14 GMT -5
Inspired by Mrfixit(scott), I bought a waste oil pump off ebay. It was made similar to Scott's homemade chevy 350 oil pump but has it's own 110v motor instead of attaching a drill. Although they do sell one with the same pump but uses a 1/2 inch drill instead. Winning bid was 134.5 (150 off their website). I was going to get the that uses a drill but I didn't have a corded drill on hand, just a cordless one, and I didn't want to hold the drill while pumping. redlinepumps.com/pages/3/index.htmthanks again for the oil Scott!!
|
|
mrfixit
bio-buddies junior member
Posts: 18
|
Post by mrfixit on Feb 12, 2006 21:21:53 GMT -5
Hey no problem! I like that pump set up too. How does the motor shaft attach to the pump shaft?
I have some electric motors about, I might try to go the homemade route.
|
|
nc73
bio-buddies member
Posts: 84
|
Post by nc73 on Feb 12, 2006 21:49:38 GMT -5
It's attached directly to the shaft (don't know exactly how). Their more expensive model uses a belt so it can handle the thicker oils.
|
|
nc73
bio-buddies member
Posts: 84
|
Post by nc73 on Feb 26, 2006 20:55:27 GMT -5
Just used the pump earlier today. Works great!
|
|